Here are four aspects to tell you how to grab the dividend of density meters

I will tell you how to rush to the scene to catch the dividend bonus of the density meter. The vibration on site has caused inconvenience to the actual work, as I have not made any plans for this case and it is difficult to inspect.

More detailed interpretation, I know it's not just that. And I am also very clear about how the density meter is used. Just take a look at the density value. The quality is still very relevant. Some density meters have adjustable range, and the viscosity is the same as density meters, but the accuracy can be adjusted. Because it is necessary to calibrate the measuring densitometer, it depends on the viscosity of 0.1%, and accuracy is the most important.

Magnetic flap level gauge insulation jacket armored thermocouple assembly type thermocouple micro thermal resistance high temperature thermocouple pressure spring thermocouple micro thermal resistance explosion-proof thermal resistance glass rotor flowmeter metal rotor flowmeter.

There are two or two external gas expansions inside the gas flow meter, one as the flow signal and the other as the throttling device of the conical tube flow meter.

● Single flange pressure tapping, six head pressure tapping (single flange), nine hole pressure tapping (double flange), ring chamber pressure tapping, four limits for flange pressure tapping.

Flow scale, fabric information, electrode condition, measured liquid conductivity, medium temperature, instrument scale, connection size, and liquid density.

The flange pressure measurement method should be selected based on the corrosiveness, wear resistance, and temperature of the measured fluid. Used in various types of water (oil, coal water slurry, mineral slurry).

The flow measurement and detection part of gas and liquid can use a straight pipe section or a front section flow rate, and the pipeline type (rel/TC) can be selected according to the flow range [4] [6] [40] [60], and a single switch can be used.

The flow range and velocity of the medium flowing through the flowmeter should be considered, and changes in fluid pressure or temperature can affect the measurement accuracy of the flowmeter, provided that the Reynolds number is small or not.

The temperature of the measuring medium (° C or patrol detection), pressure or temperature have little effect on the differential pressure signal, but have no effect on the thermometer.

Good seismic performance and service life are integrated with instrument power supply and flexible usage conditions; Pipeline vibration · direct welding type; Long term polarity rust steel ring core; Corrosiveness of lining materials and media; There is no inner lining material movement layer inside the electromagnetic flowmeter.

The flow rate is coaxial connected with the flow rate, and the microelectronic section is equivalent. Using ceramics+ceramics, and generally not suitable for measuring corrosive media. If the medium is severely worn, liquid packaging can be used.

The shape of the blades inside the ring is wavy, and the cross-section is not restricted.