Company News About The selection of foreign trade export liquid level transmitter is the most important! At least these standards must be met
The selection of foreign trade export liquid level transmitter is the most important! At least these standards must be met! For example, it is necessary to add components corresponding to the regulations of these countries with 100% content (open working conditions)! At least meet these requirements! This ensures compliance with these specifications after prolonged use! If possible, please contact us! The biggest feature of this liquid level transmitter is its high quality, which can provide a durable liquid range or choose a higher range, suitable for the special requirements of capable customers. Especially suitable for measuring high temperature liquids with a weight of up to 2400 tons and a range of up to 200 tons that are prone to crystallization, it has great application value, especially in the vicinity of crane sites that require special equipment. In addition, magnetic boats can be equipped to achieve ideal applications.
There are three obvious issues that need to be emphasized: firstly, the influencing factors of deviation: here we want to know the correct use of tools. From one perspective, one is the reference angle, and the other is the factor that affects the error caused by the reference angle. Usually, products with high precision requirements for small components may result in unstable accuracy if CAD is not used.
Usually, when using a magnetic flap level gauge, reference angles may be used to solve these three positions, because for the use of magnetic flap level gauge, most of the time we need to use them with higher accuracy, which may increase the accuracy of the entire magnetic flap level gauge without error problems.
To address the above issues, we can adopt the characteristics of reference sensor. For example, the data accuracy of a magnetic flap level gauge is very high, and the smaller the error range, the lower the deviation tolerance can be solved at this time. However, if only one sensor is used, the impact on error will be significant, which can solve the above problems.
If only one sensor is used, sometimes it is not enough. We can use one sensor to correct the error of the magnetic flap level gauge, and then provide a correction method based on the correction situation. This method can solve the problem very well.
It should be noted that the calibration of the magnetic flap level gauge is based on the following two points, and any deviation in any part can be avoided. For this issue, everyone can refer to how to eliminate such errors.
It should be noted that the calibration points of the magnetic flap level gauge are not recommended as they are relatively old. This is not something that was dropped by oneself, but rather in the next round of the process. The specific method for calibrating the magnetic flap level gauge is more important for everyone. Secondly, finding the calibration equipment is not a problem, and everyone will have no problems with the specific calibration,
Output current size. The magnetic flap level gauge displayed on site and the domestically produced magnetic flap level gauge are domestically produced, with an imported price of around 8800 yuan. The price of domestic magnetic flap level gauge on site is 8800 yuan, and the price of domestic magnetic flap level gauge is definitely higher than many domestic models compared to foreign ones.