|
Product Details:
|
| Measuring Range: | 0 ～ 0.5m, 1m, 2m, 3m, 5m, 10m, 15m ... 200m | Overload Capacity: | 300% |
|---|---|---|---|
| Power Supply: | 12 ～ 36VDC | Signal Output: | 4 ～ 20mA（two Wire）, Digital Signal: RS485（four Wire） |
| Accuracy: | 0.075% FS, 0.1% FS, 0.2% FS, 0.5% FS (including Non-linear, Repetitive, Hysteresis) | ||
| High Light: | RS485 Liquid Level Detection Sensor,IP68 Liquid Level Detection Sensor,IP68 Liquid Level Detection |
||
PPM-127E input type liquid level transmitter
Product Introduction:
The PPM-127E input type liquid level transmitter uses digital technology to collect real-time liquid level and temperature signals on the spot. After the CPU performs calculation compensation and parameter correction, it is converted by the D / A circuit into a high-precision two-wire system 4 ～ 20mA analog The signal and RS485 digital interface signal ensure the high precision and high reliability of the product. The level transmitter's zero point, full scale, unit, address and other parameters are open to users, so that when users need to adjust the product, or need to monitor multiple products at the same time, through RS485 interface and dedicated data cables and software , Perform on-site pressureless calibration and adjustment. This series offers customized services.
Applications :
Seepage level measurement for constant pressure water supply, water storage, drainage, sewage treatment systems, urban groundwater, lakes, reservoirs, dams, open oil tanks, circulating water, water towers, coolants, etc.
Technical Parameters :
| Measuring range: | 0 ～ 0.5m, 1m, 2m, 3m, 5m, 10m, 15m ... 200m |
| Overload capacity : | 300% |
| Power supply range: | 12 ～ 36VDC |
| Signal output: | 4 ～ 20mA(two wire), digital signal: RS485(four wire) |
| Accuracy : | 0.075% FS, 0.1% FS, 0.2% FS, 0.5% FS (including non-linear, repetitive, hysteresis) |
| Resolution : | 0.01% FS |
| Working medium temperature: | -30 ～ + 80 ℃ High-temperature type customization (-20 ～ + 150 ℃ / 250 ℃) |
| Working environment temperature: | -30 ～ + 70 ℃ |
| Protection class : | IP68 |
| Interface and housing : | Stainless steel 1Cr18Ni9Ti |
| Sensor diaphragm: | 316L stainless steel, 96% alumina ceramic |
| Seals: | All-in-one stainless steel construction, no plastic seals |
| Cable: | Φ7.5mm polyethylene (or polyurethane) air conducting cable |
| Installation method: | input |
Definition of wiring:
| Direct outgoing | ||
| 2-wire system | 4-wire system | |
| Power supply | Red | Red |
| Negative power | Black | Black |
| A | 一 | Green |
| B | White | |
Dimensions in mm :
Contact Person: Mr. William
